# Firmware for w1 pro

**URL:** <https://community.anviz.com/t/firmware-for-w1-pro/1143>\
**Category:** Feature Request\
**Created:** [May 25, 2023, 9:12pm UTC](https://community.anviz.com/t/firmware-for-w1-pro/1143 "2023-05-25T21:12:16Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![hbalalou](https://avatars.discourse-cdn.com/v4/letter/h/9fc348/32.png) [@hbalalou](https://community.anviz.com/u/hbalalou)\
**Post date:** [May 25, 2023, 9:12pm UTC](https://community.anviz.com/t/firmware-for-w1-pro/1143/1 "2023-05-25T21:12:16Z")

</div>

hello i need the firmware for w1 pro ,i have kernel : ver.gac16008 , current firmware:03.26.33-ARF-EI  
Serial: 0680200019330958  
I can acess the device  
thanks  
Helder

---

<div class="post-metadata">

**Author:** ![Leonardo\_Anviz](https://sea2.discourse-cdn.com/flex020/user_avatar/community.anviz.com/leonardo_anviz/32/60_2.png) [@Leonardo\_Anviz](https://community.anviz.com/u/Leonardo_Anviz)\
**Post date:** [May 29, 2023, 1:56pm UTC](https://community.anviz.com/t/firmware-for-w1-pro/1143/2 "2023-05-29T13:56:29Z")

</div>

Dear @hbalalou

Please check this topic for firmware upgrades:

> [@Summary for Anviz Product's Firmware](https://community.anviz.com/t/summary-for-anviz-products-firmware/510):
>
> For convenience we made this topic listing all firmware of Anviz access control & time attendance device. You can upgrade your device as necessary. If you don’t know how to upgrade the firmware, please refer to the upgrade guidances below: [Click to Check Upgrade Guidance Suits ST Platform Device](https://www.anviz.com/faq/58.html) ST Platform devices: T5, T5 Pro, T5 S M5, M5 Pro P7, M7 VF30, VP30, VF20 D200 EP300 A300 Get Firmware for ST device： GC Series [Latest Firmware for GC100](https://www.anviz.com/file/download/9821.html)[Latest Firmware for GC150](https://www.anviz.com/file/download/9821.html) …

---

<div class="post-metadata">

**Author:** ![hbalalou](https://avatars.discourse-cdn.com/v4/letter/h/9fc348/32.png) [@hbalalou](https://community.anviz.com/u/hbalalou)\
**Post date:** [June 6, 2023, 5:37pm UTC](https://community.anviz.com/t/firmware-for-w1-pro/1143/3 "2023-06-06T17:37:07Z")

</div>

Hi  
i upgraded from the firmware, but when i restart have a message theres a missing font i press ok and initial screen apear but now i cant acess the device, when i try to enter de default password the device come immediately to initial screen ,i dont have , the time to enter the password ??? keep going to initial screen  
( i cant acess width the crosscheck software )  
( I enter debug mode i select list firmware and …not found , i make recovery mode and restart and did the same thing…)  
What can i do ???  
thanks

---

<div class="post-metadata">

**Author:** ![Leonardo\_Anviz](https://sea2.discourse-cdn.com/flex020/user_avatar/community.anviz.com/leonardo_anviz/32/60_2.png) [@Leonardo\_Anviz](https://community.anviz.com/u/Leonardo_Anviz)\
**Post date:** [June 12, 2023, 2:03pm UTC](https://community.anviz.com/t/firmware-for-w1-pro/1143/4 "2023-06-12T14:03:21Z")

</div>

@Technical_Anviz could you please help here? Thanks!