# Hardware o Time Attendance

**URL:** <https://community.anviz.com/t/hardware-o-time-attendance/2747>\
**Category:** Feature Request\
**Tags:** time-attendance, crosschex-standard, access-control\
**Created:** [June 3, 2026, 10:33pm UTC](https://community.anviz.com/t/hardware-o-time-attendance/2747 "2026-06-03T22:33:00Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Gonzalez2](https://avatars.discourse-cdn.com/v4/letter/g/aca169/32.png) [@Gonzalez2](https://community.anviz.com/u/Gonzalez2)\
**Post date:** [June 3, 2026, 10:33pm UTC](https://community.anviz.com/t/hardware-o-time-attendance/2747/1 "2026-06-03T22:33:00Z")

</div>

EP30 Stuck in Boot Loop after “Full Disk” - CrossChex Failed to clear logs [1]

**Body (Cuerpo del mensaje):**  
Hello Anviz Support Team,

My EP30 device is stuck in a boot loop after showing a “Full Disk” error. I can successfully access the Recovery Mode screen, which shows IP `192.168.0.218` and Port `5010`. The device hardware features the **Blue/Bright screen** [1].

I have successfully established a direct network connection using a native Intel PC card set to static IP `192.168.0.100`. Communication through port 5010 is fully functional, but the device’s internal flash storage is completely locked/saturated.

When attempting to fix it, I get the following results:

1. **CrossChex (v4.3.18)** successfully connects under Device ID 1, but every action fails. The log outputs are: _“Falla al limpiar registros”_ (Failed to clear logs) and _“Falla al devolver el dispositivo a su estado de fábrica”_ (Failed to factory reset).
2. **Firmware updates** via Tftpd64 fail immediately with _Error 10054_, indicating that the processor is aborting the write process due to lack of physical disk space.

Since the commercial software cannot bypass this “Read-Only” state caused by the full storage, could you please provide the special **low-level clear script** (`clear_glog` or format command) or the precise recovery package for my hardware serial number to force-wipe the log partition?

Here are my device details:

- **Model:** EP30 / EP300 Pro (Bright Screen / Blue Display) [1]
- **Device Serial Number (S/N):** 1680200023180005

Thank you in advance for your assistance.