# Hora incorrecta

**URL:** <https://community.anviz.com/t/hora-incorrecta/1239>\
**Category:** CrossChex Cloud\
**Created:** [July 11, 2023, 4:04pm UTC](https://community.anviz.com/t/hora-incorrecta/1239 "2023-07-11T16:04:45Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![fseijo](https://avatars.discourse-cdn.com/v4/letter/f/d2c977/32.png) [@fseijo](https://community.anviz.com/u/fseijo)\
**Post date:** [July 11, 2023, 4:04pm UTC](https://community.anviz.com/t/hora-incorrecta/1239/1 "2023-07-11T16:04:45Z")

</div>

Buenas tardes, hoy nos está pasando que nos está genrando el registro con una hora de retraso. Bien sea a través de la APP bien sea a través de dispositivo. En ambos casos, tanto los móviles como el dispositivo (W2-Pro) muestran correctamente la hora en la pantalla pero al ver los registros en el cloud, observamos que le ha restado una hora. ¿A que se puede deber esto?. Muchas gracias.

---

<div class="post-metadata">

**Author:** ![Leonardo\_Anviz](https://sea2.discourse-cdn.com/flex020/user_avatar/community.anviz.com/leonardo_anviz/32/60_2.png) [@Leonardo\_Anviz](https://community.anviz.com/u/Leonardo_Anviz)\
**Post date:** [July 12, 2023, 2:43pm UTC](https://community.anviz.com/t/hora-incorrecta/1239/2 "2023-07-12T14:43:40Z")

</div>

Hola @fseijo

Puede ser la configuracion de horario de verano (DST).

Aca tenemos un topico sobre esto:

> [@How to Synchronize Daylight Saving Time When CrossChex Cloud Is Connected](https://community.anviz.com/t/how-to-synchronize-daylight-saving-time-when-crosschex-cloud-is-connected/1000):
>
> Please make sure the device is connected to Cloud and follow the steps below: Enter-Menu-Setting-General Check and set correct time zone. After Cloud is connected, the device time will be synchronized to standard time you set. Enter number into Handle DST. Different countries could have different time difference for daylight saving. Enter 1 if your device is 1 hour later after Daylight Saving Note: It’s not allowed to enter negative number. Click “confirm” to…

---

<div class="post-metadata">

**Author:** ![fseijo](https://avatars.discourse-cdn.com/v4/letter/f/d2c977/32.png) [@fseijo](https://community.anviz.com/u/fseijo)\
**Post date:** [July 12, 2023, 3:02pm UTC](https://community.anviz.com/t/hora-incorrecta/1239/3 "2023-07-12T15:02:26Z")

</div>

Buenas tardes. Lo vi esta esta misma mañana. DST activado con un 1 y funcionando ok. Muchas gracias.