# Multiple Access methods per user - M3Pro/Crosschex Standard

**URL:** <https://community.anviz.com/t/multiple-access-methods-per-user-m3pro-crosschex-standard/271>\
**Category:** General Questions\
**Tags:** m3pro, crosschex-standard\
**Created:** [May 11, 2022, 9:52pm UTC](https://community.anviz.com/t/multiple-access-methods-per-user-m3pro-crosschex-standard/271 "2022-05-11T21:52:07Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![albert](https://avatars.discourse-cdn.com/v4/letter/a/48db29/32.png) [@albert](https://community.anviz.com/u/albert)\
**Post date:** [May 11, 2022, 9:52pm UTC](https://community.anviz.com/t/multiple-access-methods-per-user-m3pro-crosschex-standard/271/1 "2022-05-11T21:52:07Z")

</div>

Hi,

I have a doubt I can’t solve:

- I have an M3Pro Access Control on the street level, to acces an office building, and then another M3Pro next to the office door, inside the building at the 1st floor.

- I am worried that someone loses their card and then someone unauthorised enters the building and office.

- What I would like to achieve is having the Street level door with Card+PIN, and the Office door just with Card.

- At the moment, when I register a user, it only allows to choose Card+PIN or just Card for all devices.

How can I assign different identification methods across different devices?

Thank you very much,  
Albert

---

<div class="post-metadata">

**Author:** ![Leonardo\_Anviz](https://sea2.discourse-cdn.com/flex020/user_avatar/community.anviz.com/leonardo_anviz/32/60_2.png) [@Leonardo\_Anviz](https://community.anviz.com/u/Leonardo_Anviz)\
**Post date:** [May 12, 2022, 1:19pm UTC](https://community.anviz.com/t/multiple-access-methods-per-user-m3pro-crosschex-standard/271/2 "2022-05-12T13:19:16Z")

</div>

Hi @albert , my suggestion is to download and install the CrossChex Standard software, then communicate your devices with the software.

By the management software is easier to set recognition mode, you can choose individually for each device and user how is going to be the access mode.

For example:

User ID #1 will need Card **AND** Password on the device #1 (street entrance), then password **OR** card for the device #2 (office building).

You can download our software by this link:

[https://www.anviz.com/file/download/9552.html](https://www.anviz.com/file/download/9552.html)

Best Regards

---

<div class="post-metadata">

**Author:** ![albert](https://avatars.discourse-cdn.com/v4/letter/a/48db29/32.png) [@albert](https://community.anviz.com/u/albert)\
**Post date:** [May 13, 2022, 12:11pm UTC](https://community.anviz.com/t/multiple-access-methods-per-user-m3pro-crosschex-standard/271/3 "2022-05-13T12:11:18Z")

</div>

Muchas gracias por tu respuesta Leonardo. Sigo en español al ver en tu perfil que lo hablas 🙂

El problema que tengo es que no puedo discriminar según dispositivo. Utilizo Crosschex Standard, pero al crear/modificar un usuario sólo sale una opción de “identificación”, la cual se aplica a todos los dispositivos.

Mi pregunta entonces es, ¿dónde encuentro el lugar o cómo hago para diferenciar el modo de identificación según el dispositivo que seleccione?

¡Muchas gracias!

---

<div class="post-metadata">

**Author:** ![Leonardo\_Anviz](https://sea2.discourse-cdn.com/flex020/user_avatar/community.anviz.com/leonardo_anviz/32/60_2.png) [@Leonardo\_Anviz](https://community.anviz.com/u/Leonardo_Anviz)\
**Post date:** [May 13, 2022, 2:24pm UTC](https://community.anviz.com/t/multiple-access-methods-per-user-m3pro-crosschex-standard/271/4 "2022-05-13T14:24:08Z")

</div>

Saludos nuevamente @albert …

Creo que mejor continuarmos por el otro tópico, acabo de responder a tus consultas allá.

> [@M3Pro - only PIN Access](https://community.anviz.com/t/m3pro-only-pin-access/270/3):
>
> ¡Muchas gracias Leonardo! La última pregunta al respecto sería, ¿puedo mantener la identificación con tarjetas, y adicionalmente tener 1 código PIN de Admin para abrir la puerta funcionando en paralelo? ¿O debe funcionar todo con tarjetas O todos con PIN? Por último, esta funcion de sólo PIN, ¿dónde se encuentra en Crosschex Standard? ¡Muchas gracias!

Caso siga con alguna inquietud avísame por allá, vale?

Saludos