Ethernet Setting in device:
1. Go to device administration page (put user: 0 PW: 12345 , then ok) to choose network.
2. Choose Internet button.
3. Choose “Ethernet ” in WAN mode.
4. Choose Ethernet button.
5. Activate Network.
6. Input the IP address can be connected with PC or choose DHCP (Auto).
WIFI Setting in device:
1. Go to device administration page (put user: 0 PW: 12345 , then ok) to choose network.
2. Choose Internet button.
3. Choose “Ethernet ” in WiFi mode.
4. Choose WiFi button.
5. Connect to WIFI Available.
6. Choose DHCP
Note: After Ethernet/WiFi connected, the"!"on right corner Ethernet/WiFi logo will disappear;
Test device connection with computer:
